رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain end w/two grooves
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Casehardened
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
Between 0.0350 inches and 0.0400 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.41900 inches and 0.41950 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.2420 inches and 0.2520 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
1.9250 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
89.0 rockwell superficial 15-n
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Straight-thru bore
Radial Groove Radius:
0.005 inches
MRC:
The distance from the center of the groove to the end of the item.ANTT
Distance From End To Groove Center:
Between 0.0360 inches and 0.0460 inches
Distance Between Groove Centers:
Between 1.8080 inches and 1.8190 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, federal standard 66, aisi/sae 1018 or steel, federal standard 66, aisi/sae 1025 or steel astm a334 gr 1 or gr 6
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 or steel comp 1025 or steel astm a334 gr 1 or gr 6
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard 1st material response or aisi 1018 assn standard single material response or sae 1018 assn standard single material response and federal standard 66 federal standard 2nd material response or aisi 1025 assn standard single material response or sae 1025 assn standard single material response
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Engine, gasoline, nonaircraft
