رقم الجزء 99070-012-24

Flexible Shaft Assembly

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 729.86 and 985.311 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
99070-012-24
تجريد:
Yes - DEMIL/MLI
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
005341567
NSN
رقم المخزون الوطني:
1680-00-534-1567 1680005341567
TXT
وصف:
Flexible Shaft Assembly
INC
INC
رمز اسم العنصر:
20315
INC
COM
امتثال:
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b both ends
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand both ends
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.220 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.310 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.750 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12 both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.242 inches both ends
MRC:
A measurement of the longest dimension of the tip,in distinction from width.AEDN
Tip Length:
0.500 inches both ends
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.500 inches both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.250 inches both ends
MRC:
The element,compound,or mixture of which the core is fabricated.AJXJ
Core Material:
Steel
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Uns both ends
MRC:
The length of a straight line which passes through the center of the core,and terminates at the circumference.AKMH
Core Diameter:
0.250 inches
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal both ends
MRC:
Indicates the type of end.APTD
End Type:
Round, external splined both ends
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.750 inches both ends
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Threaded internal both ends
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
14.5 both ends
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.242 inches both ends
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute both ends
MRC:
An indication of whether or not a setscrew(s) is included.BDRL
Setscrew:
Not included both ends
MRC:
The element,compound,or mixture of which the casing is fabricated,excluding any surface treatment.BJPS
Casing Material:
Steel
MRC:
Indicates the type of facility utilized to assemble or disassemble the item.BPPL
Wrenching Facility Type:
Hexagon both ends
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.406 inches diameter both ends
MRC:
The amount of twisting or degree of bending which the item is designed to withstand.CFRM
Torsional Deflection Rating:
50 degrees ft-lb in. Torsional deflection in winding direction, 75 degrees ft-lbin unwinding direction
MRC:
A measurement of the longest dimension of the casing between ferrules,in distinction from width.CFRP
Casing Length Between Ferrules:
11.750 inches
MRC:
The length of a straight line which passes through the center of the casing,and terminates at the outside circumference.CFRQ
Casing Outside Diameter:
0.445 inches
MRC:
An indication of whether or not a swivel end(s) is provided.CFRT
Swivel End:
Not provided both ends
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of the end of the item.CFRW
Enddiameter:
0.875 inches both ends
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the core.CFRZ
Corelength:
12.750 inches
MRC:
The direction in which the core is designed to rotate,when viewed axially,from the drive end.CFSB
Core Rotation Direction:
Clockwise or counterclockwise
MRC:
An indication of whether or not the core(s) is removable.CFSL
Core Removability:
Nonremovable
MRC:
The radius of the smallest operating circle for which the item is designed.CGDN
Minimum Operating Radius:
3.000 inches
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Actuator, electro-mechanical linear, aircraft

{lang[cimilar]} Flexible Shaft Assemblies

« Miscellaneous Aircraft Accessories and Components {lang[catalog]}
قارن الآن»
واضح | أخفى