رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Winch and motor assembly
TXT
وصف:
Vehicle Mounting Drum Winch
MRC:
The number of prime movers incorporated in the unit.AAXH
Prime Mover Quantity:
2
MRC:
The pressure required to actuate the power driven unit.ADQX
Power Drive Operating Pressure:
1300.0 pounds per square inch gage
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Dust-ignition proof and oilproof and watertight
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Truck, utility (2320-01-413-3739)
MRC:
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.AKNA
Inclosure Type:
Partially enclosed
MRC:
The working period under which the item was designed to operate.AKPS
Duty Cycle:
Continuous
MRC:
The distance between flanges on the drum,and the location on the item.ATWD
Drum Flange To Flange Distance And Location:
9.000 inches first drum
MRC:
The length of a straight line which passes through the center of the drum,and terminates at the circumference,and its location on the item.ATWE
Drum Diameter And Location:
6.380 inches first drum
MRC:
The length of a straight line which passes through the center of the drum flange,and terminates at the circumference,and its location on the item.ATWF
Drum Flange Diameter And Location:
6.500 inches first drum
MRC:
An indication of the capstan spool/s/ mounting position.ATWG
Capstan Spool Mounting Position:
Horizontal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the capstan spool.ATWH
Capstan Spool Style:
Straight head
MRC:
The design of the capstan spool surface.ATWJ
Capstan Spool Surface Design:
Plain
MRC:
The number of capstan spools included.ATWK
Capstan Spool Quantity:
1
MRC:
The total load the item is capable of moving at selected speeds and the drum location.ATWN
Load Limit At Selected Speed And Drum Location:
4000.0 pounds single speed first drum
MRC:
The means by which an item is retrieved.ATXB
Retrieval Winding Method:
Overwind
MRC:
Indicates the gear housing location on the item and the number of each.ATXC
Gear Housing Location And Quantity:
1 right of drum
MRC:
Indicates the location of the drive end/s/ on the item.ATXD
Drive End Location:
Any acceptable
MRC:
The power required to start and operate the item at rated capacity.ATYG
Power Requirement Rating:
56.0 watts
MRC:
The design on the drum surface.ATYH
Drum Surface Design:
Grooved
MRC:
A measurement of the longest dimension of a winch,in distinction from width.AWEX
Winch Length:
25.000 inches
Largest Diameter And Location:
7.250 inches first spool
Overall Length And Location:
25.000 inches first spool
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Water-hydrogen cooled
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item is hydraulic
