رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Item has two keys, 180 degrees apart, which measure 0.4700 in. Min. And0.4800 in. Max.; item used on the f101-ge-102 engine
TXT
وصف:
Bearing Retaining Plate
MRC:
The number of lugs required.AAGG
Lug Quantity:
4
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/o aperture
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 3.3500 inches and 3.3900 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.2960 inches and 0.3030 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Four holes
Distance Between Holes Along Length:
3.6910 inches
Distance Between Holes Along Width:
3.6910 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.1300 inches and 0.1450 inches
MRC:
A measurement taken at right angles to the length of the lug,in distinction from thickness.AHMM
Lug Width:
Between 0.6600 inches and 0.7000 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
Between 0.0550 inches and 0.0600 inches
Distance From Vertical Centerline To Center Of Right Hole:
1.9350 inches
Distance From Horizontal Centerline To Center Of Right Hole:
1.7560 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
Radius From Center Of Plate To End Of Lug:
Between 2.2100 inches and 2.2300 inches
Outside Raised Surface Diameter:
Between 0.6600 inches and 0.7000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6415 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round with lugs
