رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
a-12106chnfssa-12p10ss
معلومات الجزء
Control box assembly
TXT
وصف:
Distribution Box
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
Dusttight and watertight-nema type 4
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
6.000 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
8.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
12.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
10.000 inches
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.ACSY
Furnished Items And Quantity:
14 gauge stainless steel panel (p/n: a12p10ss) 10.75 x 8.88 inches with no.10-32 panel screws
MRC:
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.AEBV
Unthreaded Mounting Hole Diameter:
0.031 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.AEBW
Center To Center Distance Between Mounting Facilities Parallel To Height:
12.750 inches
MRC:
A designation of the standard mounting facility arrangement provided.AESL
Standard Mounting Pattern Designator:
4 point-rectangular
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
(ssb) aig housing dissassembly stand assembly
MRC:
The means of attaching the item.AXGY
Mounting Method:
Bracket with hole
MRC:
Indicates the type of device used to lock the item.AZAF
Locking Device Type:
Screw and clamp (2)
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Cover
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Type 304 ss; seams continuously welded; seamless foam-in-place gasket assures watertight and dust-tight seal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular, surface mounting
