رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Bracket, outrigger assembly
TXT
وصف:
Double Angle Bracket
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain and threaded
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 5.75 inches and 5.81 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 5.75 inches and 5.81 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Spaceradar
Second Leg Width:
Between 4.97 inches and 5.03 inches
First Leg Hole Diameter:
Between 2.22 inches and 2.28 inches
Second Leg Hole Diameter:
Between 2.22 inches and 2.28 inches
Second Leg Distance From Edge To Hole Center Along Width:
2.50 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 3.44 inches and 3.50 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.245 inches and 0.255 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.245 inches and 0.255 inches
Center Section Height:
6.900 inches
Center Section Width:
Between 4.97 inches and 5.03 inches
Center Section Thickness:
Between 0.245 inches and 0.255 inches
First Leg Width:
Between 4.97 inches and 5.03 inches
First Leg Distance Between Hole Centers Along Width:
2.50 inches
First Leg Distance Between Hole Centers Along Length:
1.97 inches
First Leg Distance From Edge To Hole Center Along Width:
1.00 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 1.47 inches and 1.53 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
MRC:
The number of holes provided.ASXK
Hole Quantity:
3
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
Second Leg Angle:
90.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Second hole on the first leg is smaller with a 0.1590 inch diameter, that has 10-32 unc-2b threading. Assembly consists of: (1) bracket, u channel p/n: a1-44077d-1, (1) washer, reinforcement p/n: a1-44077d-2, (1) pin assembly, locating p/n: 12417258, (1) rod, acme threaded 1.0-10 thd p/n: d1-44079d, (1) nut, hex p/n: us016ag1a002565, (1) lanyard p/n: a3156794-002, (1) double loop hair pin p/n: hair-7db, (1) washer, flat p/n: ms15795-846, (1) tie-down ring p/n: s3711-0003, (1) screw, machine, pan head .1900-32 unf-2a x .312 lg p/n: ms51958-60, (1) ring, retaining p/n: 90905a655, (1) shoulder screw, 10-32 thd self-locking p/n: pat4426, and thread locking compound per mil-s-22473 as required.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130 or steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae ams6345b assn standard 1st material response and ams6395f assn standard 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adjacent angles
