رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.515 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
39.250 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and -69.0 degrees fahrenheit
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
8.500 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.500 inches
Outside Corner Radius:
0.620 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
6.620 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
37.250 inches
MRC:
A measurement taken across the bearing surface,in distinction from thickness.ADUV
Bearing Surface Width:
1.000 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
8.750 inches
Outside Edge To Bolt Hole Center Distance Along Width:
2.120 inches
Outside Edge To Bolt Hole Center Distance Along Length:
1.160 inches
Bolt Hole Centerline To Nearest Edge Distance:
0.580 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.380 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
