رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
3000.0 inch-pounds
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
Between 0.505 inches and 0.510 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 0.600 inches and 0.610 inches
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
11
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
10000.0
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.550 inches
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Splined, involute internal
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Counterclockwise
MRC:
A measurement of the spline pitch of the item.ASAP
Spline Pitch:
20/40
MRC:
The maximum rated working pressure of an item at a specified temperature range.AXFB
Maximum Working Pressure Rating At Specificationified Tempurature Range:
3150psi at 160 degrees f
MRC:
The design of the connection.AXFC
Connection Design:
Threaded
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
An indication of the constant displacement per revolution.AXFQ
Constant Displacement Per Revolution:
0.408 cubic inches
MRC:
The spacing in the arrangement of the mounting bolt holes.AZFG
Mounting Bolt Hole Spacing:
3.536 in. By 3.536 in.
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated by the source control dwg no.
