رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Id and od fractured on centerline and notched w/60 degrees angle
TXT
وصف:
Thrust Ball Bearing
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 1.0570 inches and 1.0670 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of a bore,and terminates at the circumference.AGWJ
Bore Smallest Diameter:
Between 2.7950 inches and 2.8050 inches
Largest Bore Diameter:
Between 2.8700 inches and 2.8800 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of an item,and terminates at the outside circumference.AGWL
Smallest Outside Diameter:
Between 3.9800 inches and 3.9810 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
Between 4.1860 inches and 4.1870 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.AGZA
Alignment Type:
Rigid
MRC:
A designation of the directional operating capability of the item.AGZQ
Thrust Directional Capability Designation:
Single
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed-std-66 federal standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Grooved raceways, large od center washer, w/seating rings
