رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Ear one corner of cover and 45.0 degrees raise on same end; 124.25 mm between holes on opposite side with ear
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
3.75 millimeters and 4.00 millimeters
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
70.25 millimeters
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
132.85 millimeters
Distance Between Holes Along Length:
127.25 millimeters
Distance Between Holes Along Width:
Between 65.63 millimeters and 65.87 millimeters
Distance From First Hole Centerline To End Along Length:
Between 2.78 millimeters and 3.02 millimeters
Distance From First Hole Centerline To End Along Width:
Between 2.00 millimeters and 2.24 millimeters
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.81 millimeters
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, t4 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, cl 3 military specification single treatment response
