رقم الجزء A42437

Safety Relief Valve

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 5657.6 and 7398.4 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
a42437
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
001635161

معلومات الجزء
Items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. These items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines, and shore stations of the us navy. Critical features including, but not limited to, dimensions, tolerances/clearances, electronic characteristics, and metallurgical properties will bespecified for government q ar (quality assurance representatives) to insure the highest possible degree of quality and reliability of these parts being delivered under navicp contracts

NSN
رقم المخزون الوطني:
4820-00-163-5161 4820001635161
TXT
وصف:
Safety Relief Valve
INC
INC
رمز اسم العنصر:
05488
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Disk
MRC:
Indicates the type of housing on the item that accommodates the stem packing or spring.ADSR
Bonnet Type:
Exposed spring
MRC:
The means by which the bonnet is attached to the item.ADST
Bonnet Attachment Method:
Bolted
MRC:
The means of closing the item when inlet pressure decreases.ADSU
Disk Loading Method:
Spring
MRC:
The rated valve discharge capacity per unit of time.ADSY
Valve Discharge Flow Rate:
43200.0 pounds per hour
MRC:
Indicates the type of renewable seating ring in the item.ADZH
Renewable Seat Ring Type:
Threaded
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8 1st end
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8 2nd end
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Automatic or manual
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Round with holes 1st end
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Round with holes 2nd end
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Pressure tight outlet side
MRC:
Designates the size of the valve.CCFG
Valve Size:
2.500 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The predetermined pressure at which the item is calibrated to open.CSDC
Opening Pressure Setting:
710.0 pounds per square inch
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
7.500 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
9.000 inches 2nd end
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
1.188 inches 2nd end
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
1.250 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.875 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.875 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
5.875 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
7.250 inches 2nd end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised straight 2nd end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Recessed straight 1st end
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.062 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
5.500 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the recess,and terminates at the circumference.CWDP
Recess Diameter:
6.875 inches 1st end
MRC:
A nominal measurement between specified points on the recess,in distinction from height.CWDS
Recess Depth:
0.062 inches 1st end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Err-090
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle flanged ends
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated by the valve discharge flow rate requirement

{lang[cimilar]} Safety Relief Valves

« Nonpowered Valves {lang[catalog]}
قارن الآن»
واضح | أخفى