رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Insert material: copper alloy; knob material: plastic; setscrew material: steel
MRC:
The number of setscrew holes included on the item.ABFR
Setscrew Hole Quantity:
2
MRC:
The distance from the center of the hole to the base of the knob or base of skirt if with integrally molded skirt.ABFU
Distance From Hole Center To Knob/skirt Base:
Between 0.300 inches and 0.368 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 2.997 inches and 3.003 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Setscrews and hole
Knob Portion Diameter:
Between 2.303 inches and 2.323 inches
MRC:
The order of the numeric scale markings of the dial.ABWD
Scale Direction And Range:
100 to 100 clockwise single scale
MRC:
The number of scale divisions.ABWG
Scale Division Quantity:
100 single scale
MRC:
The number of turns of the dial in relation to one turn of the knob or other actuating mechanism.ABWS
Drive Ratio:
5.1 single
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Friction
MRC:
Indicates the type of scale.ATEQ
Scale Type:
Linear single scale
MRC:
Indicates the type of drive provided for turning,rotating,or positioning the screw.CBSC
Screw Drive Type:
Slot
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 screw hole
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.138 inches screw hole
MRC:
Indicates the type of mechanism used for positioning the item.CRRL
Positioning Mechanism Type:
Movable scale
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 1.751 inches and 1.875 inches
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel dial
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round w/knob
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc screw hole
