رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Unthreaded securing hole diameter: 0.125 in. first diameter and 0.560 in. second diameter
TXT
وصف:
Propeller Shaft With Universal J
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Err-070 and err-070
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Err-070 and err-070
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
1.250 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
36.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.AEDX
Shaft Style (non-core):
Err-090
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Err-070 and err-070
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
Err-070
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
Err-070 and err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Err-070
MRC:
An indication of whether or not a hub securing hole is included.BTBM
Hub Securing Hole:
Err-070
MRC:
Indicates the location of the securing hole on the item.BTBN
Securing Hole Location:
0.438 in. From end of hub
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the universal joint.BTBT
Universal Joint Style:
C7
MRC:
Indicates the type and location of the end component(s).BTBX
End Component Type And Location:
Universal joint both ends
MRC:
Indicates the type of connection end(s) on the universal joint.BTCC
Universal Joint Connection End Type:
Err-070
Distance From Centerline To Keying Facility:
Err-070 and err-070
Shaft Facility Spline Quantity:
10
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Vehicular power transmission
