رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Section Block Clamp
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.899 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.380 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.190 inches and 0.196 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
Distance From Center Of Mounting Hole To Edge Along The Width:
0.188 inches
Center To Center Distance Between First And Second Mounting Holes:
2.087 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.375 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
5
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.188 inches second hole and 0.192 inches second hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.250 inches fifth hole and 0.254 inches fifth hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.250 inches first hole and 0.254 inches first hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.250 inches fourth hole and 0.254 inches fourth hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.250 inches third hole and 0.254 inches third hole
Distance From End To First Mounting Hole Center:
0.562 inches
Distance From End To First Clamping Hole Center:
0.250 inches
Center To Center Distance Between First And Second Clamping Holes:
0.593 inches
Center To Center Distance Between First And Third Clamping Holes:
1.070 inches
Center To Center Distance Between First And Fourth Clamping Holes:
1.578 inches
Center To Center Distance Between First And Fifth Clamping Holes:
2.086 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
