رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Four 4-40-nc-2 holes equally spaced on 0.781 in. Diameter mtg ctr through side of largest step dia
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved
Second End Groove Width:
Between 0.0390 inches and 0.0420 inches
Second End Groove Diameter:
Between 0.4720 inches and 0.4760 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.495 inches and 1.505 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.5615 inches and 0.5620 inches
Second End Distance From End To Groove:
0.054 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4999 inches and 0.5002 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
4
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.932 inches and 0.942 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
0.25 in. Sq hole through first end 0.5 in. Deep; 0.375 in. Diameter hole through second end 1 in. Deep
