رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Spdt 3.0 amp 28 vdc contact also on item
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.547 inches and 6.577 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.875 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.625 inches
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Two no. 8/0.164in./-32 thd holes spaced 5.938 in. C to c
MRC:
The basic structure of the item.ALXF
Structural Design:
Sectional
MRC:
The operating current for which the item is rated.APAM
Operating Current Rating:
0.63 amperes
MRC:
The value/s/ of direct current potential which must be applied to the item for operation,expressed in volts.APBR
Dc Operating Voltage Rating In Volts:
30.0
MRC:
Indicates the type of current used with the contact/s/.APFX
Contact Current Type:
Dc
MRC:
The maximum voltage rating at which the contact is rated,expressed in volts.APLS
Contact Maximum Voltage Rating In Volts:
30.0
MRC:
The amount of current at maximum rated voltage for which the contact/s/ is designed.APLT
Contact Current Rating At Maximum Rated Voltage:
3.0 amperes
MRC:
The specific number of contact terminals included.APNG
Contact Terminal Quantity:
263
MRC:
The specific number of coil terminals included.APNH
Coil Terminal Quantity:
2
MRC:
An indication of whether or not the reset facilities are provided.APNR
Reset Facility Feature:
Not provided
MRC:
The opposition that the coil offers to the flow of direct current.BDFT
Coil Dc Resistance:
20.0 ohms
MRC:
The number of sections included.BWGP
Section Quantity:
10
MRC:
The number of coil winding(s) provided.CPWL
Coil Winding Quantity:
1
MRC:
An indication of the characteristic(s) of a winding.CPWM
Winding Characteristic:
Single wound untapped
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Bank surfaces and wiper surfaces gold and contacts palladium
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Gold and palladium
