رقم الجزء AA1730-1251-11

Headless Shoulder Pin
توافر المخزون  رموز حالة المنتج

رقم الجزء aa1730-1251-11 في المخزون بالكميات والشروط التالية.

  • NE: 1
  • AR: 1
  • NS: 1

ملاحظة: تم آخر تحديث لتوفر هذا المنتج 11/28/2022 وربما تغيرت منذ ذلك الحين. اطلب عرض أسعار للأسعار المحدثة والتوافر.

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 67.82 and 91.557 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
aa1730-1251-11
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
010210056

معلومات الجزء
Undercut dim. 1.781 in. From end, 0.812 in. Dia, 0.344 in. Width, and grip dim. Above shoulder 0.724 in. Dia, 1.250 in. Lg

NSN
رقم المخزون الوطني:
5315-01-021-0056 5315010210056
TXT
وصف:
Headless Shoulder Pin
INC
INC
رمز اسم العنصر:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
3.906 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
1.500 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.994 inches and 0.996 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.344 inches
MRC:
None.AMCS
First End Taper Length:
0.062 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
None.CQTR
Second Shank Diameter:
Any acceptable
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches grip
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shank end
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shoulder end
MRC:
None.CWAS
Second Shank Length:
Any acceptable
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder

{lang[cimilar]} Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى