رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
aa59494-23-e-3
معلومات الجزء
Weapon system essential
TXT
وصف:
Pneumatic Tire Wheel
MRC:
The numeric term ply rating is used as an index of strength and does not necessarily represent the actual number of cord plies in the tire.AAFV
Ply Rating:
6
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
Between 0.020 inches and 0.050 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.0678 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.040 inches
MRC:
A measurement taken across the bearing surface,in distinction from thickness.ADUV
Bearing Surface Width:
0.750 inches
MRC:
A measurement taken across the bearing surface,in distinction from thickness.ADUV
Bearing Surface Width:
0.9063 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Grumman a-10 aircraft; aircraft, hornet f/a-18
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the rim.AJUP
Rim Style:
Curved base
MRC:
A designation indicating the size by which the item is commercially known and/or identified.AJXE
Size Designator:
9.00
MRC:
Indicates the design type of the item.APGF
Design Type:
Divided wheel
MRC:
The physical configuration of the item.ARJD
Design Form:
Disk
MRC:
An indication of whether or not a hub is included.ASBL
Hub:
Included
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Included
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Single tire
MRC:
The number of bearings provided on the item.BDDY
Bearing Quantity:
1
MRC:
The length of a straight line which passes through the center of a bearing,and terminates at the inside circumference.BDFN
Bearing Inside Diameter:
1.250 inches
MRC:
The length of a straight line which passes through the center of a bearing,and terminates at the inside circumference.BDFN
Bearing Inside Diameter:
1.625 inches
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
Located 1/4 in. Offset from center of rim
MRC:
A measurement of the smallest dimension of the metal,in distinction from length or width.BNPQ
Metal Thickness:
Between 0.1495 inches and 0.1560 inches
MRC:
Indicates the type of disk.BPLM
Disk Type:
Double
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
Indicates the type of bearing provided.BYDT
Bearing Type:
Tapered roller
MRC:
The physical configuration of the valve hole.CDMC
Valve Hole Shape:
Round
MRC:
The nominal length of a straight line which passes through the center of the tire rim,and terminates at the circumference.CFHQ
Tire Rim Diameter:
9.000 inches
MRC:
An indication of whether or not a tire is included.CFHR
Tire:
Included
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the rim.CFHY
Rim Style:
15
MRC:
An indication of the characteristic of the hub.CFJH
Hub Characteristic:
Demountable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CFJJ
Hub Style:
2
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided
Axle Recess Major Diameter:
1.6245 inches
Axle Recess Minor Diameter:
1.2495 inches
Sand Band Recess Major Diameter:
2.125 inches
Major Sand Band Recess Depth:
0.625 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CXQW
Hub Style:
Single recess tapered
