رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Navy special project
TXT
وصف:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.250 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
12.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Pan no. 2
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
1.375 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.625 inches
MRC:
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.AAWB
Shank Unthreaded Hole Diameter:
4.2 millimeters first hole
First Diameter From Head:
Between 0.714 inches and 0.724 inches
Second Diameter From Head:
0.938 inches
Third Diameter From Head:
Between 0.714 inches and 0.724 inches
Fourth Diameter From Head:
0.938 inches
Fifth Diameter From Head:
Between 0.714 inches and 0.724 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
1.438 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
2.688 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
3.500 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
4.500 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
6.250 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.875 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
14
Tenth Diameter From Head:
0.750 inches
Eighth Diameter From Head:
0.938 inches
Distance From Largest Bearing Surface Of Head To End Of Seventh Diameter:
8.125 inches
MRC:
The distance from the shank hole centerline to the largest bearing surface of the head.CRZS
Distance From Head Largest Bearing Surface To Shank Hole Center:
12.031 inches first hole
Err Default:
Err default and err default
Ninth Diameter From Head:
Between 0.714 inches and 0.724 inches
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
10
Distance From Largest Bearing Surface Of Head To End Of Ninth Diameter:
10.625 inches
Distance From Largest Bearing Surface Of Head To End Of Sixth Diameter:
7.250 inches
Err Default:
Err default and err default
Seventh Diameter From Head:
Between 0.714 inches and 0.724 inches
Sixth Diameter From Head:
0.938 inches
Distance From Largest Bearing Surface Of Head To End Of Eighth Diameter:
9.313 inches
Distance From Largest Bearing Surface Of Head To End Of Tenth Diameter:
11.000 inches
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
