رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Has 24 time-calibrated sweep circuits 1-2-5-10 sequence from 0.1 usec to 5 sec/cmp 3 x100 sweep magnification 10-50-100- 500-1000 cm sing sweep trigg capabilities beam-finder control preset triggering sweep circuits incl 12.5 sec per cm to .02 usec pep cm
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
24.125 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
14.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
19.250 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 50.0 hertz and 400.0 hertz
MRC:
The name assigned to the item by the joint electronics type designation system.AKWA
Joint Electronics Type Designation System Item Name:
Oscilloscope
MRC:
The type number assigned to the item by the joint electronics type designation system.AKWB
Joint Electronics Type Designation System Item Type Number:
An/usm-105a
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Oscilloscope os-82a/usm-105 1, adapter ug-255/u 2 adapter ug-273/u 2, adapter ug-274a/u 2, connector adapter ug-1035/u 4 cord cg-409e/u 8.0 2, cable assembly, power cx-4704/u 8.0 1 cover oscilloscops cw-511/usm-105 1, prod test mx-2817/u 1,
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 115.0 volts and 230.0 volts
MRC:
The means of attaching the item.AXGY
Mounting Method:
Table
MRC:
Designates the relative or proportionate dimensions of the screen.BGQK
Screen Size:
5 inch scren
MRC:
An indication of whether or not sweep circuits are included.BGQL
Sweep Circuits:
Included
MRC:
Indicates the type of sweep circuits provided.BGQN
Sweep Circuit Type:
Horizontal
MRC:
The length of time consumed by a single trigger sweep.BGQQ
Single Trigger Sweep Duration:
Between 0.0 seconds and 12.0 seconds
MRC:
The maximum absolute value for which the trigger sweep voltage is rated.BGRZ
Trigger Sweep Voltage Amplitude Rating:
Between 5.0 volts and 60.0 volts
MRC:
An indication of whether or not a trigger sweep polarity switch is included.BGSB
Trigger Sweep Polarity Switch:
Included
MRC:
An indication of whether or not provisions for rating the deflection sensitivity through the amplifier are provided.BHDD
Amplifier Deflection Sensitivity Provision:
Provided
MRC:
The value,or range of values,for which the vertical deflection sensitivity is rated.BHDF
Vertical Deflection Sensitivity Voltage Rating:
0.02 volts peak to peak per centimeter
MRC:
The value,or range of values,for which the horizontal deflection sensitivity is rated.BHDG
Horizontal Deflection Sensitivity Voltage Rating:
0.1 volts any acceptable megahertz and 12.5 volts peak megahertz
MRC:
An indication of whether or not provisions for rating the direct connection to the plate deflection sensitivity is provided.BHDL
Plate Direct Connection Deflection Sensitivity Provision:
Provided
MRC:
The value,or range of values,at which the vertical deflection for direct connection is rated to respond.BHDM
Direct Connection Vertical Deflection Sensitivity Voltage Rating:
20.0 volts any acceptable megahertz
MRC:
The value,or range of values,at which the horizontal deflection for direct connection is rated to respond.BHDN
Direct Connection Horizontal Deflection Sensitivity Voltage Rating:
40.0 volts peak to peak per centimeter
MRC:
An indication of whether or not a frequency response rating is provided.BHDP
Frequency Response Rating:
Provided
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
