رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
as39-203-4792257d
TXT
وصف:
Ship Propulsion Shaft
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
14.000 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
12.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
37.000 feet
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
3.500 feet
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
Between 22.998 inches and 23.000 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
Between 1.843 inches and 1.853 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Any acceptable
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Propeller nut 1, propeller key 2, pipe plug 1, plug 1
MRC:
Indicates the type of unit.APQB
Unit Type:
Propeller shaft section
MRC:
Indicates the type of protective covering provided.APZX
Protective Covering Type:
Rubber, synthetic
MRC:
The structural characteristic of the item.ARQS
Construction:
Hollow
MRC:
The number of threads per specific measurement scale.AZRW
Thread Quantity:
4 per inch
MRC:
An indication of whether or not a forward end keyway is provided.CPJF
Forward End Keyway:
Not provided
MRC:
An indication of whether or not an after end keyway is provided.CPJG
After End Keyway:
Provided
MRC:
The design of the forward end coupling.CPJH
Forward End Coupling Design:
Integral
MRC:
The length of a straight line which passes through the center of the forward end coupling,and terminates at the outside circumference.CPJK
Forward End Coupling Outside Diameter:
Between 37.245 inches and 37.250 inches
MRC:
A measurement of the smallest dimension of the forward end coupling,in distinction from length or width.CPJM
Forward End Coupling Thickness:
Between 4.615 inches and 4.625 inches
MRC:
The design of the after end.CPTC
After End Design:
Tapered
MRC:
An indication of whether or not a threaded after end is included.CPTD
Threaded After End:
Included
MRC:
The length of a straight line which passes through the center of the forward bearing sleeve,and terminates at the outside circumference.CPTF
Forward Bearing Sleeve Outside Diameter:
Between 24.745 inches and 24.750 inches
MRC:
A measurement of the longest dimension of the forward bearing sleeve,in distinction from width.CPTG
Forward Bearing Sleeve Length:
0.917 feet
MRC:
The length of a straight line which passes through the center of the after bearing sleeve,and terminates at the outside circumference.CPTH
After Bearing Sleeve Outside Diameter:
Between 24.745 inches and 24.750 inches
MRC:
A measurement of the longest dimension of the after bearing sleeve,in distinction from width.CPTP
After Bearing Sleeve Length:
11.750 feet
MRC:
Indicates the location on an item to which a covering has been applied.CPTS
Covering Location:
Surfaces between bearing sleeves
MRC:
The amount of taper of the item.CTKF
Taper:
1.000 per foot in inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-23284, class 3
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, mil-s-23284, class 3
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
2
