رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Weapon system essential
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F/a-18 hornet aircraft
MRC:
Designates the thread diameter and number of threads per measurement scale of an externally threaded item.AWMG
External Thread Size:
3/4-14
MRC:
Designates the thread diameter and number of threads per measurement scale of an internally threaded item.AWMH
Internal Thread Size:
1/2-14
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch oil err-100 err-100
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch oxygen, gaseous err-100 err-100
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch steam err-100 err-100
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch water err-100 err-100
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch oil
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch oxygen, gaseous
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch steam
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
3000.0 pounds per square inch water
MRC:
A measurement of the working temperature and the type of service for which rated.CDPH
Working Tempurature And Service Type:
225.0 degrees fahrenheit oil err-100 err-100
MRC:
A measurement of the working temperature and the type of service for which rated.CDPH
Working Tempurature And Service Type:
225.0 degrees fahrenheit water err-100 err-100
MRC:
A measurement of the working temperature and the type of service for which rated.CDPH
Working Tempurature And Service Type:
225.0 degrees fahrenheit gas err-100 err-100
MRC:
A measurement of the working temperature and the type of service for which rated.CDPH
Working Tempurature And Service Type:
225.0 degrees fahrenheit gas
MRC:
A measurement of the working temperature and the type of service for which rated.CDPH
Working Tempurature And Service Type:
225.0 degrees fahrenheit oil
MRC:
A measurement of the working temperature and the type of service for which rated.CDPH
Working Tempurature And Service Type:
225.0 degrees fahrenheit water
MRC:
A designation distinguishing one group of external screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CGMD
External Screw Thread Series Designator:
Anpt
MRC:
The direction of the external thread when viewed axially.CGMF
External Thread Direction:
Right-hand
MRC:
A designation distinguishing one group of internal screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CGMH
Internal Screw Thread Series Designator:
Anpt
MRC:
The direction of the internal thread when viewed axially.CGMJ
Internal Thread Direction:
Right-hand
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, qq-a-225/4, alloy 2014, t6
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2014
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/4, alloy 2014, t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
N1 outside hexagon or octagon (partial or full thread optional)
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Outside hexagon or octagon (partial or full thread optional)
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Anodized, mil-a-8625, type 2, class 2
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
88044an912 government standard and 81343-as4842 professional/industrial association standard
