رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
1.250 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
1.250 inches
Overall Thickness:
0.750 inches
Flatted Portion Length:
0.375 inches
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Metal working
MRC:
The means of attaching the item.ADJH
Mounting Method:
Arbor hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Round
MRC:
The angle formed by the angular portion of the item,expressed in degrees.ADVR
Angle In Deg:
70.0
MRC:
A substance or combination of substances used to unite and give solidity to the item.ADYW
Binder Material:
Vitreous substance
MRC:
The element,compound,or mixture of which the abrasive is fabricated,excluding any backing material,binder,mix,or lubricant.AHCM
Abrasive Material:
Aluminum oxide, mil-w-17929
MRC:
A designation indicating the rated size of the individual particles,sometimes expressed as a mesh size.AHCN
Screen Grit Size Designator:
120
MRC:
The number or symbol designating the structure or grain spacing which is determined by the proportion and arrangement of the abrasive and bond.AHCS
Abrasive Grain Structure Designator:
10
Hole Thickness:
0.375 inches
Outside Flat Diameter:
3.000 inches
Inside Flat Diameter:
3.000 inches
MRC:
A measurement taken at right angles to the length of an edge,in distinction from thickness.AHDE
Edge Width:
0.125 inches
MRC:
A designation indicating the relative strength /holding power/ of the bond which holds the abrasive grains in place.AHDY
Abrasive Bond Grade Designation:
K medium
MRC:
The length of a straight line which passes through the center of the wheel,and terminates at the circumference.BCDX
Wheel Diameter:
6.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wheel.CZHQ
Wheel Style:
Dish
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
12 type
