رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.875 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
2.625 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.875 inches
Overall Thickness:
0.3125 inches
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Metal working
MRC:
The means of attaching the item.ADJH
Mounting Method:
Arbor hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Round
MRC:
A substance or combination of substances used to unite and give solidity to the item.ADYW
Binder Material:
Resinoid, reinforced
MRC:
The element,compound,or mixture of which the abrasive is fabricated,excluding any backing material,binder,mix,or lubricant.AHCM
Abrasive Material:
Aluminum oxide
MRC:
A designation indicating the rated size of the individual particles,sometimes expressed as a mesh size.AHCN
Screen Grit Size Designator:
24
MRC:
The number or symbol designating the structure or grain spacing which is determined by the proportion and arrangement of the abrasive and bond.AHCS
Abrasive Grain Structure Designator:
14
MRC:
A measurement taken at right angles to the length of an edge,in distinction from thickness.AHDE
Edge Width:
0.125 inches
MRC:
A designation indicating the relative strength /holding power/ of the bond which holds the abrasive grains in place.AHDY
Abrasive Bond Grade Designation:
U hard
MRC:
The maximum speed at which the item is designed to operate,expressed in revolutions per minute.ATPR
Maximum Speed Rating In Rpm:
Not rated
MRC:
The length of a straight line which passes through the center of the wheel,and terminates at the circumference.BCDX
Wheel Diameter:
7.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wheel.CZHQ
Wheel Style:
Special "zd"
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
27 type
