رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
b74.2andb74.13
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.500 inches
Overall Thickness:
0.750 inches
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Metal working
MRC:
The means of attaching the item.ADJH
Mounting Method:
Arbor hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Round
MRC:
A substance or combination of substances used to unite and give solidity to the item.ADYW
Binder Material:
Vitreous substance
MRC:
The element,compound,or mixture of which the abrasive is fabricated,excluding any backing material,binder,mix,or lubricant.AHCM
Abrasive Material:
Aluminum oxide
MRC:
A designation indicating the rated size of the individual particles,sometimes expressed as a mesh size.AHCN
Screen Grit Size Designator:
36
MRC:
The number or symbol designating the structure or grain spacing which is determined by the proportion and arrangement of the abrasive and bond.AHCS
Abrasive Grain Structure Designator:
5
MRC:
A designation indicating the relative strength /holding power/ of the bond which holds the abrasive grains in place.AHDY
Abrasive Bond Grade Designation:
O medium
MRC:
The maximum speed at which the item is designed to operate,expressed in revolutions per minute.ATPR
Maximum Speed Rating In Rpm:
Not rated
MRC:
The length of a straight line which passes through the center of the wheel,and terminates at the circumference.BCDX
Wheel Diameter:
4.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wheel.CZHQ
Wheel Style:
Straight
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
80204-ansi b74.2 and b74.13 professional/industrial association standard
