رقم الجزء B94.2

Countersink
وصف

Iaw table 32: straight shank center reamers (short countersinks) - (hss), 3 or 4 straight flutes. These reamers are used in machining to make existing holes dimensionally more accurate, to improve surface finish & are mostly used in the metalworking area

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 45.98 and 62.073 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
b94.2
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
6 EA
NIIN:
002933019

معلومات الجزء
Flute quantity: 3 to 4

NSN
رقم المخزون الوطني:
5133-00-293-3019 5133002933019
TXT
وصف:
Countersink
INC
INC
رمز اسم العنصر:
05260
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Straight round
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.812 inches and 2.750 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
0.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the cutting end.AKZH
Cutting End Style:
Straight flute point end
MRC:
The direction in which the item is designed to rotate in order to cut.AKZV
Cutting Rotation Direction:
Right-hand
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 62.0 rockwell c and 65.0 rockwell c
MRC:
None.CTHT
Included Angle:
82.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
05047-asme b94.2 professional/industrial association standard

{lang[cimilar]} Countersinks

« Drill Bits, Counterbores and Countersinks: Hand and Machine {lang[catalog]}
قارن الآن»
واضح | أخفى