رقم الجزء BACG20ZB001100

Nonmetallic Grommet

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
bacg20zb001100
تجريد:
صلاحيه:
وحدة القياس:
NIIN:
016244488

معلومات الجزء
Grommet, caterpillar

NSN
رقم المخزون الوطني:
5325-01-624-4488 5325016244488
TXT
وصف:
Nonmetallic Grommet
INC
INC
رمز اسم العنصر:
33729
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.100 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.090 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.175 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.155 inches
MRC:
None.AFXB
Tab Width:
0.067 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the grommet.AGME
Grommet Style:
Edging
MRC:
None.AGMT
Width Between Tabs:
0.067 inches
MRC:
Indicates the type of design used in constructing the grommet.AGMU
Grommet Construction Type:
Split
MRC:
None.CQZH
Grommetlength:
Between 10.970 inches and 11.030 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item purchased in bulk coil length, then cut to lenght; maximum operating temp is 275 degrees f
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Brown or natural
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyamide
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm d4066, pa0111, l-p-410, type 6-6 assn standard single material response

{lang[cimilar]} Nonmetallic Grommets

« Fastening Devices {lang[catalog]}
قارن الآن»
واضح | أخفى