رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Chamfer on slotted end 45 degrees nom by 0.030 in. Lg
TXT
وصف:
Headless Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Slotted
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.070 inches
Second Hole Diameter:
0.070 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.120 inches and 0.130 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
Between 0.670 inches and 0.700 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
Between 0.940 inches and 0.950 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 0.1860 inches and 0.1900 inches
Second End Slot Width:
Between 0.037 inches and 0.050 inches
First End Taper Length:
0.030 inches
First End Slot Depth:
Between 0.029 inches and 0.045 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
First End Taper Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1020 or steel comp 1025
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a108 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, cl 2 federal specification single treatment response