رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two 5/32 deep by 1/4 in. Radius grooves, one located 22-1/2 in. Degrees left angle from key, 2nd one 180 degrees from 1st one on bb end of hub
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.750 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.875 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
7.500 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.251 inches and 0.253 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
3/8-16
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.500 inches
MRC:
The distance from the center of the bore to the bottom of the keyway(s).AEVF
Distance From Center Of Bore To Bottom Of Keyway:
Between 0.599 inches and 0.636 inches
MRC:
A measurement of a line segment extending from the center of a groove to the inside surface.AGWA
Groove Radius:
0.125 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest portion of a tapered bore,and terminates at the circumference.ANAL
Taper Bore Major Diameter:
Between 1.000 inches and 1.001 inches
MRC:
The length of a straight line which passes through the center of the smallest portion of a tapered bore,and terminates at the circumference.ANAM
Taper Bore Minor Diameter:
0.937 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel rim and iron hub
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
2.187 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Tapered
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
Indicates the location of the taper major diameter.AWPJ
Taper Major Diameter Location:
Aa end
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
2
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
One located 22-1/2 degrees right angle from keyway, 2nd one 180 degrees from 1st one
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Included
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
U
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
Indicates the location of the largest dimension of the keying facility.BYDY
Keying Facility Largest Dimension Location:
Aa end
MRC:
Indicates the location for securing the item.BYFF
Securing Location:
Bb end
Hub End Outside Diameter And Location:
1.625 inches aa end and 1.630 inches aa end and 1.750 inches bb end
Distance From Outside Flange/rim To Hub End And Location:
1.000 inches aa end and 0.343 inches bb end
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
