رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Junction pattern arrangement: npn
MRC:
The element,compound,or mixture of which the inclosure is fabricated,excluding any surface treatment.ABBH
Inclosure Material:
Plastic
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.8 millimeters and 3.0 millimeters
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.1 millimeters
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.2 millimeters and 1.4 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6625-01-286-3566
MRC:
An indication of the internal basic form of the item.ALAS
Internal Configuration:
Junction contact
MRC:
The alpha-numeric symbol assigned by the electronic industries association,to registered physical configurations of the cases for electronic items.ALAZ
Joint Electronic Device Engineering Council/jedec/case Outline Designation:
Sot-23
MRC:
The means of attaching the item.AXGY
Mounting Method:
Terminal
MRC:
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.CBME
Cubic Measure:
4.620 cubic inches
MRC:
The chemical compound or mechanical mixture properties of which the semiconductor is fabricated.CTMZ
Semiconductor Material:
Silicon
MRC:
The value of the voltage that may be applied,expressed in volts,and the symbol used to identify the specific electrical characteristic.CTQN
Voltage Rating In Volts Per Characteristic:
40.0 collector to emitter voltage/static/base open and 75.0 collector to base voltage/static/emitter open and 6.0 emitter to base voltage, static, collector open
MRC:
The level of electrical flow and the symbol used to identify the specific electrical characteristic.CTQX
Current Rating Per Characteristic:
800.00 milliamperes source cutoff current and 100.00 milliamperes source cutoff current
MRC:
The amount of electrical power that can be dissipated and the specific electrical characteristic.CTRD
Power Rating Per Characteristic:
330.0 milliwatts small-signal input power, common-collector preset
MRC:
The ratio of the input electrical signal to the output electrical signal at specified operating conditions.CTRK
Transfer Ratio:
40.0 static forward current transfer ratio, common-emitter
MRC:
The maximum temperature at which the item is designed to operate at each measurement point.CTSG
Maximum Operating Tempurature Per Measurement Point:
150.0 degrees celsius junction
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
3 uninsulated wire lead
