رقم الجزء C-9080

Flexible Shaft Coupling

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 4398.992 and 5752.528 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
c-9080
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
* special requirements. EA
NIIN:
011142109

معلومات الجزء
Made of 1040 steel; teeth are induction hardened; rockwell c 45 to 50; keyway depth at large end and keyway top runs parallel to center line; taper is 3/4 in to the ft; second counterbore 3 in. Dia, 3/16 in deep

NSN
رقم المخزون الوطني:
3010-01-114-2109 3010011142109
TXT
وصف:
Flexible Shaft Coupling
INC
INC
رمز اسم العنصر:
04459
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
2.5000 inches both ends
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.5000 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.250 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.750 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
1.6020 inches both ends
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.499 inches both ends
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.2500 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
2.0625 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Internal gear
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway both ends
MRC:
The means by which the item is secured.BSNP
Securing Method:
Key both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway and counterbore and spline gear teeth
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
1.7000 inches both ends

{lang[cimilar]} Flexible Shaft Couplings

« Torque Converters and Speed Changers {lang[catalog]}
قارن الآن»
واضح | أخفى