رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Grumman aircraft corp, a-10 aircraft model
TXT
وصف:
Tube Coupling Nut
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Any acceptable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Tube coupling
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft application
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.875 inches
Length To Shoulder:
Any acceptable
MRC:
The smallest length of a straight line which passes through the center of the two surfaces of a circular item,and terminates at the inside circumference.BSPX
Smallest Inside Diameter:
Between 0.505 inches and 0.508 inches
MRC:
The smallest length of a straight line which passes through the center of the two surfaces of a circular item,and terminates at the inside circumference.BSPX
Smallest Inside Diameter:
Between 0.505 inches and 0.508 inches 0.508 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unf
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
16
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.750 inches
MRC:
The nominal length of a straight line which passes through the center of a tube,and terminates at the outside circumference.CQRJ
Tube Outside Diameter:
0.500 inches
Seat Angle:
33.00 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
J514 assn standard single treatment response
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81343-j514 professional/industrial association standard
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
15 figure
