رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Rectangular, bracketed
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
7.100 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
2.060 inches
MRC:
The number of individual sections included in the item.AFBH
Individual Section Quantity:
1
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
1.310 inches
MRC:
The longest distance between mounting centers parallel to the vertical plane.AFDV
Longest Vertical Distance Between Mounting Centers:
5.600 inches
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
-18.0/+100.0 degrees celsius
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
4
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Enamel, mil-e-15090, type 3, class 2
MRC:
The total oppositon (resistive and reactive) which the item offers to the input flow of alternating current.ANSL
Input Impedance Rating:
180.000 ohms
MRC:
The total opposition (resistive and reactive) which the item offers to the output flow of alternating current.ANSR
Output Impedance Rating:
180.000 ohms
MRC:
A measurement between specified points on a body in distinction from height.ARBR
Body Depth:
2.080 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Threaded stud
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Four position rectangular
MRC:
The decrease in strength of an electrical impulse,expressed in decibels.BHTH
Attenuation In Decibels:
6.000
MRC:
The means by which the signal is delayed.BZWM
Signal Delay Method:
Inductance
MRC:
The means used to vary the delay time of the item.CCDN
Delay Time Variation Method:
Tapped
MRC:
The time delay of each section of an item.CCDQ
Section Delay Time:
10.550 microseconds single section
MRC:
The number of segments into which a section is divided.CCDR
Segment Quantity Per Section:
9 single section
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
1.350 microseconds single section 3rd segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
1.550 microseconds single section 3rd segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
10.150 microseconds single section 9th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
150.000 nanoseconds single section 1st segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
2.800 microseconds single section 4th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
3.000 microseconds single section 4th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
350.000 nanoseconds single section 1st segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
4.250 microseconds single section 5th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
4.450 microseconds single section 5th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
5.900 microseconds single section 6th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
5.700 microseconds single section 6th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
550.000 nanoseconds single section 2nd segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
650.000 nanoseconds single section 2nd segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
7.150 microseconds single section 7th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
7.350 microseconds single section 7th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
8.800 microseconds single section 8th segment err-100
MRC:
The time delay of each segment.CCDS
Segment Delay Time:
8.600 microseconds single section 8th segment err-100
MRC:
The rated time required for the pulse to rise.CCDX
Pulse Rise Time Rating:
700.0 nanoseconds
MRC:
Indicates the type and number of terminals for providing electrical connection.CCFF
Terminal Type And Quantity:
10 wire leads
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.THDS
Thread Size And Series/type Designator:
0.137-32 unc
