رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
145.0 micron rating; 70.0gpm; horizontal design; flanges: sae 4 bolt; intergal bracket
TXT
وصف:
Sediment Strainer
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Bracket w/drilled hole bottom side
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.750 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
16.880 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
7.500 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
11.000 inches
MRC:
The distance between the centerline of the mounting holes.AFQM
Distance Between Mounting Hole Centers:
1.688 inches and 3.062 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Navy weapon system code jk, wasp class lhd
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -40.0 degrees fahrenheit and 160.0 degrees fahrenheit
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
By-pass valve
MRC:
The number of brackets provided.CBQD
Bracket Quantity:
1
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
575.0 pounds per square inch
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Woven single filtering media response
MRC:
Indicates the type of connection on the first intake.CRXZ
First Intake Connection Type:
Plain face flange top side
MRC:
Indicates the first discharge connection relationship to an intake connection.CSJR
First Discharge Connection Relationship To Intake Connection:
Identical to first intake connection
MRC:
A designation that is used for the purpose of general identification of the inside diameter.CSQB
First Discharge Inside Diameter:
2.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the flange.CSTD
First Intake Flange Shape Style:
Rectangular w/threaded bolt holes
MRC:
The style designation indication the configuration that most nearly corresponds to the shape of the flange.CSWC
First Discharge Flange Shape Style:
Rectangular w/threaded bolt holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange face.CTBJ
First Intake Flange Face Style:
Plain
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange face.CTCS
First Discharge Flange Face Style:
Plain
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic seal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304 filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil, hydrocarbon
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
High pressure angle strainer w/bolted cover
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
53711-0900-lp-003-9000 class 1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated by navsea 0900-lp-003-9000 class 1
