رقم الجزء C8360

Nonmetallic Special Shaped Seal

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
c8360
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
008633518

معلومات الجزء
Gasket incl four 0.312 in. Nom diameter bolt holes, 0.281 in. Nom outside edges to bolt holes center distance along width and length, 4.938 in. Nom c to c distance between bolt holes along width and 8.062 in. Nom c to c distance between bolt holes along length

NSN
رقم المخزون الوطني:
5330-00-863-3518 5330008633518
TXT
وصف:
Nonmetallic Special Shaped Seal
INC
INC
رمز اسم العنصر:
32847
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid bulb off set
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Solid
MRC:
The distance of offset in the item.ACSX
Offset Distance:
0.039 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.422 inches
MRC:
None.ADPW
Outside Corner Radius:
0.281 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
5.594 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
7.719 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.047 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.125 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.453 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-acrylonitrile class nbr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-7362, type 2 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular

{lang[cimilar]} Nonmetallic Special Shaped Seals

« Packing and Gasket Materials {lang[catalog]}
قارن الآن»
واضح | أخفى