رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.AAJC
Thread Size And Series/type Designator:
0.625-11 unc
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.625 inches
Overall Thickness:
2.000 inches
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Metal working
MRC:
The means of attaching the item.ADJH
Mounting Method:
Thread insert
MRC:
A substance or combination of substances used to unite and give solidity to the item.ADYW
Binder Material:
Resinoids
MRC:
The element,compound,or mixture of which the abrasive is fabricated,excluding any backing material,binder,mix,or lubricant.AHCM
Abrasive Material:
Aluminum oxide, ggg-w-290
MRC:
A designation indicating the rated size of the individual particles,sometimes expressed as a mesh size.AHCN
Screen Grit Size Designator:
24
Hole Thickness:
0.750 inches
Outside Flat Diameter:
4.000 inches
Inside Flat Diameter:
2.000 inches
Grinding Face Wall Thickness:
1.000 inches
MRC:
A designation indicating the relative strength /holding power/ of the bond which holds the abrasive grains in place.AHDY
Abrasive Bond Grade Designation:
R hard
MRC:
The maximum speed at which the item is designed to operate,expressed in revolutions per minute.ATPR
Maximum Speed Rating In Rpm:
Not rated
MRC:
The length of a straight line which passes through the center of the wheel,and terminates at the circumference.BCDX
Wheel Diameter:
5.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wheel.CZHQ
Wheel Style:
Flaring cup
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
80204-ansi b74.2 and b74.13 professional/industrial association standard
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
As modified by mounting data
