رقم الجزء CA12294-7

Shouldered Shaft

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 2344.3 and 3164.805 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
ca12294-7
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
011482841

معلومات الجزء
Nickel-copper alloy bar class a, cold drawn; first end 1.1/4-7unc thd rh; second end 3/4-10unc thd lh; eighth step 2.368in.Dia thd-18/inch rh 13/16in.Lg; 4 key ways: 2nd step 3/8 x 0.207, 5th step 1/2 x 0.270, 8th step 5/16 x 1/8, 10th step 1/2 x 0.270; 2 tapered lengths: 4th step 2-1/4in. To 2-3/4in. By 2-17/32in. Lg, 9th step no. 9 taper 0.500in./ft for 2-7/16 in.

NSN
رقم المخزون الوطني:
3040-01-148-2841 3040011482841
TXT
وصف:
Shouldered Shaft
INC
INC
رمز اسم العنصر:
22914
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
External threaded
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and externally threaded
MRC:
None.AAHW
Second End Groove Width:
0.0620 inches
MRC:
None.AAHX
Second End Groove Diameter:
0.6250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
32.781 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Buffalo pump model 6x10 vem
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.2500 inches
MRC:
None.AMEA
First End External Thread Length:
0.875 inches
MRC:
None.AMFQ
Second End Distance From End To Groove:
0.562 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.7500 inches
MRC:
None.AMHA
Second End External Thread Length:
0.562 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
11
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
2.750 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a federal specification single material response

{lang[cimilar]} Shouldered Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
قارن الآن»
واضح | أخفى