رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The means used to attach the item.ABSX
Attachment Method:
Mounting hole
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
37
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
2 plain transversely through side and 3 plain transversely through side
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.500 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
7.500 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spur
Pitch Height:
Between 0.4375 inches and 0.4455 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
14.5000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.500 inches
MRC:
The nominal length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.CWZK
Mounting Hole Diameter:
0.187 inches transversely through side and 0.203 inches transversely through side
MRC:
The nominal distance from the end of the item to the center of the first mounting hole.CWZS
Distance From End To First Mounting Hole Center:
0.500 inches transversely through side
MRC:
The nominal distance between the center of a mounting hole and the center of an adjacent mounting hole.CWZZ
Center To Center Distance Between Mounting Holes:
1.625 inches transversely through side
MRC:
The nominal distance from the center of a mounting hole to the bottom of the item.CXBS
Distance From Mounting Hole Center To Bottom:
0.189 inches transversely through side
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square or rectangular
