رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Spiral Wound Gasket
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal winding w/ soft filler and outer ring
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
1050.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.719 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
3.625 inches
MRC:
A measurement taken across the bearing surface,in distinction from thickness.ADUV
Bearing Surface Width:
0.547 inches
Gage Ring Outside Diameter:
7.750 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.170 inches and 0.180 inches
Gage Ring Thickness:
Between 0.117 inches and 0.131 inches
MRC:
The maximum pressure at which an item is rated to operate.CTQW
Maximum Pressure Rating:
2500.0 pounds per square inch
MRC:
Indicates the type of product that meets or exceeds the government guidelines for environmentally preferred characteristics.ENAC
Environmental Attribute Code:
Asbestos alternative products
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Graphite spiral wound filler and steel comp 347 spiral wound filler
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel outer ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-24503, type 1, cl 2 military specification 1st material response spiral wound filler and astm a167 assn standard 2nd material response spiral wound filler
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Circular
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
2 type and a class and ips3 size and 2500 series
