رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
cp441-2-12s-b-e-b-250-4.5-015
معلومات الجزء
Dual overcenter valve, cartridges in body version
TXT
وصف:
Manifold Valve Assembly
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.250 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
5.910 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.000 inches
MRC:
The number of end connections included in the item.ADQZ
End Connection Quantity:
2
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Hydraulic
MRC:
The number of valves provided.ATQR
Valve Quantity:
2
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external pipe
MRC:
Designates the size of the valve.CCFG
Valve Size:
0.750 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
5000.0 pounds per square inch hydraulic fluid, petroleum base
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.3125 inches
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
100.0 degrees fahrenheit hydraulic fluid, petroleum base
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Seals are made of viton a; 4 ports - 2 valve ports and 2 cylinder ports; nha valve, counter; adjustable via screw from 1000 to 5000 psi; 4: 1 pilot ratio; has 4 0.41 inch diameter mounting holes
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un
