رقم الجزء CR597308

Plain Seal

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
cr597308
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
015577603

معلومات الجزء
Axial clamp seals ct3 design

NSN
رقم المخزون الوطني:
5330-01-557-7603 5330015577603
TXT
وصف:
Plain Seal
INC
INC
رمز اسم العنصر:
04250
MRC:
A measurement taken between the flat surfaces /front and back/ of the seal,in distinction from thickness.ADUC
Seal Width:
1.125 inches
MRC:
The length of a straight line which passes through the center of a circular housing bore,and terminates at the circumference.CPCW
Housing Bore Diameter:
0.937 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Skf axial clamp seals are produced in three different designs: ct1, ct3, and ct4 design; these axial clamp seals are made of appropriately profiled strips of non-reinforced nitrile rubber which are held firmly in place by stainless steel screw-type clamps; they are available in the diameter range 150 to 4600 mm; the seals do not rotate but seal axially against a rotating counterface; ct3 design: the seals of the ct3 design differ from those of the ct1 design only in the form of the sealing lip; this is again flat but is provided with annular grooves; these serve to trap contaminants which may have started to penetrate the lip/counterface contact; the operating interference for these seals is +4, 8 mm; shaft: 42.500 in.; od: 43.688 in.; weight: 4.250 lbs

{lang[cimilar]} Plain Seals

« Packing and Gasket Materials {lang[catalog]}
قارن الآن»
واضح | أخفى