رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
cvc10010-161ga
معلومات الجزء
Along length flanges on both sides narrow from normal width from center (at 4.04 in. From first tip) to 1.01 in. From center (at 6.73 in. From first tip); flanges widen from 1.01 in. From center (at 13.18 in. From first tip) to normal width (at 15.88 in. From first tip); weapons system is aircraft, b-2 bomber (atb)
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Extruded
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.440 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 18.800 inches and 18.820 inches
Left Side Top Flange Thickness:
Between 0.115 inches and 0.135 inches
Right Side Top Flange Thickness:
Between 0.115 inches and 0.135 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
T shape
Leg Thickness:
Between 0.115 inches and 0.135 inches
Left Side Top Flange Distance To Center Of Both Flanges:
2.560 inches
Right Side Top Flange Distance To Center Of Both Flanges:
2.560 inches
Fillet Radius Where Top Left Flange Joins Web Flange/leg:
Between 0.110 inches and 0.130 inches
Fillet Radius Where Top Right Flange Joins Web Flange/leg:
Between 0.110 inches and 0.130 inches
Top Flange Width:
5.120 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first tip.CMZY
First Tip Style:
Right taper length
Err Default:
Err default and err default
Err Default:
Err default and err default
First Tip Thickness:
Between 0.990 inches and 1.010 inches
Err Default:
Err default and err default
MRC:
An indication of whether or not the second tip is identical to the first tip.CNQJ
Second Tip Relationship To First Tip:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second tip.CNQK
Second Tip Style:
Left taper length
Right Top Inside Angle:
90.0 degrees
Left Top Inside Angle:
90.0 degrees
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
Annealed
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Titanium alloy, mil-t-81556, comp ab-1
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy, mil-t-81556, comp ab-1
