رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Rotating Counter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.155 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.531 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.031 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
0.125 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
0.500 inches
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
2.156 inches
MRC:
The longest distance between mounting centers parallel to the vertical plane.AFDV
Longest Vertical Distance Between Mounting Centers:
0.593 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5820-00-230-4428, receiver, radio
MRC:
The number of register(s) contained in the item.ANQD
Register Quantity:
2
MRC:
The number of digits displayed on each register of the item.ANQS
Figure Quantity Per Register:
2 1st register single tier
MRC:
The number of digits displayed on each register of the item.ANQS
Figure Quantity Per Register:
1 2nd register single tier
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
0.270 inches all registers single tier
MRC:
The number of shaft revolutions required to make one count.ANRD
Shaft Revolutions Per Count:
0.10 all registers single tier
MRC:
The maximum number of counts the item can accomplish in a measured time.ANRE
Maximum Count Rate:
10000.0 per minute all registers single tier
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting.ANRL
Mounting Arrangement Style:
Four position square/rectangle
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add all registers single tier
MRC:
Indicates the location of the actuating device on the item.AXEG
Actuating Device Location:
Left side all registers single tier
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 threaded hole
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Panel all registers single tier
MRC:
The means by which the display of the numeral is provided.CSWS
Numeral Display Method:
Drum
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
0 2nd register single tier and 9 2nd register single tier
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
00 1st register single tier and 99 1st register single tier
MRC:
The direction the shaft turns as viewed from the drive end and the maximum speed,expressed in revolutions per minute.CSWW
Shaft Rotation Direction And Maximum Speed In Rpm:
10000.0 clockwise all registers single tier and 1000.0 counterclockwise all registers single tier
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black all registers single tier figure
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
White all registers single tier figure background
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Unenclosed square or rectangular
