رقم الجزء DAA7257P176-101

Countersink Cutter

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 7449 and 9741 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
daa7257p176-101
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014646757

معلومات الجزء
Tile cutter consists of a 2 in dia, 2 flute countersink and a micro-stop fixture. Countersink is 3 in long w/a diameter of 2 in; body 2 in lg w/2 in dia, w/slot on one end 0.3 in w to hold cutter; other end 7/16-20 unf-2a threads, which screw into the micro-stop fixture. Cutter is 1 in lg w/dia 2 in; base 0.3 in w.Fixture diameter 3 in, consists of barel section and foot. Barrel 3/8 in diameter shank, inserts into chuck of drill. The other end threads onto the cutter.The foot threads onto barrel to control depth of cut w/range of approx 1 in and shaft a travel of 0.5 in. Wt 2 lbs; used to remove damaged tile material from upper hot trailing edge using pneumanic drill, n2149

NSN
رقم المخزون الوطني:
5133-01-464-6757 5133014646757
TXT
وصف:
Countersink Cutter
INC
INC
رمز اسم العنصر:
05426
MRC:
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.AAVA
Point Diameter:
0.300 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
2.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the cutting end.AKZH
Cutting End Style:
Spiral flute blunt end
MRC:
The specific holder which the item is designed to accommodate.AKZX
Holder Accommodated:
Micro-stop fixture
MRC:
The number of flutes provided.ALAR
Flute Quantity:
2
MRC:
None.CTHT
Included Angle:
Between 119.7 degrees and 120.3 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel cutter and carbide cutter
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide film cutter

{lang[cimilar]} Countersink Cutters

« Drill Bits, Counterbores and Countersinks: Hand and Machine {lang[catalog]}
قارن الآن»
واضح | أخفى