رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Einside edge of threaded pivot hole csk 90.0 degrees to 0.270 dia; four sidesflatted perpendicular to pivot hole and clevis slot to 0.875 in. W and 0.875 in. H; all surfaces finished to 63.0 microinches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.500 inches rod connection
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.252 inches and 0.253 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Between 0.990 inches and 0.992 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.254 inches and 0.256 inches
Distance From Pivot Pinhole Center To Rod Connection End:
1.000 inches
Fork Arm Thickness:
0.310 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.500 inches
Distance From Pivot Pinhole Center To Fork End:
0.312 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches pivot pin hole
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.375 inches rod connection
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 400
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc pivot pin hole
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc rod connection
