رقم الجزء E-7633-M

Nonvehicular Clutch Disk

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 139.34 and 188.109 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
e-7633-m
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
008726338

معلومات الجزء
Damper spring encasement provision included; integral hub included

NSN
رقم المخزون الوطني:
3010-00-872-6338 3010008726338
TXT
وصف:
Nonvehicular Clutch Disk
INC
INC
رمز اسم العنصر:
52059
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
1.147 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.355 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
12.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.750 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.150 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
26
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
1.3000 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
The terminology used to indicate the arrangement of the teeth.AQQH
Tooth Arrangement:
Continuous
MRC:
The physical configuration of the item.ARJD
Design Form:
Cushion segment
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute
MRC:
Indicates the type of disk.BPLM
Disk Type:
Internal teeth
MRC:
The number of cushion segments provided.BSPM
Cushion Segment Quantity:
6
MRC:
The number of damper springs provided.BSPN
Damper Spring Quantity:
8
MRC:
The number of teeth in each disk.BSQC
Teeth Quantity Per Disk:
26
MRC:
A measurement indicating the diameter-pitch per measurement scale of the teeth.BSQD
Teeth Pitch Diameter:
1.300 inches
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.TMQY
Furnished Items And Quantity:
8 damper spring

{lang[cimilar]} Nonvehicular Clutch Disks

« Torque Converters and Speed Changers {lang[catalog]}
قارن الآن»
واضح | أخفى