رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Inside diameter flange end, counterbore, 2.6870 in. Min, 2.6920 in. Maximum dia, 0.5000 in. Deep
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.2500 inches first
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.3125 inches second
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.6250 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 4.1825 inches and 4.1925 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 2.4385 inches and 2.4395 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
5.7500 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.7500 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Relief groove left flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter surface of body
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
3 hole and 3 hole
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.2500 inches internal keyway depth
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.5000 inches internal keyway width
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1141
