رقم الجزء EL09-009-024

Spur Gear

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 32.74 and 44.199 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
el09-009-024
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
000456768

معلومات الجزء
Both hubs relieved at gear face with a groove angled into hub and gearface at 45 deg, 0.080 in.W, 0.060 in. Deep, 1st hub end relieved by groove at1st step 0.100 in.W, 0.055 in.Deep, 1ststep has keyway 0.0938 in.W, 0.1545 in.Deep, 1st hub end thd 0.500-13 unc-2a

NSN
رقم المخزون الوطني:
3020-00-045-6768 3020000456768
TXT
وصف:
Spur Gear
INC
INC
رمز اسم العنصر:
05466
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
1.5000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
9
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Plain both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
89.0 rockwell superficial 15-n and 91.0 rockwell superficial 15-n
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
89.0 rockwell superficial 15-n and 91.0 rockwell superficial 15-n
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
1.8395 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
25.0000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.530 inches second end
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
1.872 inches first end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.998 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.188 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
2 steps both ends
MRC:
A nominal measurement of the longest dimension of the end of the item,in distinction from width.CWWH
End Length:
0.7400 inches both ends
MRC:
The nominal length of a straight line which passes through the center of the end of the item,and terminates at the circumference.CWWN
End Diameter:
0.500 inches first end
MRC:
A nominal measurement of the longest dimension of the first step,in distinction from width.CWWS
First Step Length:
0.4600 inches both ends
MRC:
The nominal length of a straight line which passes through the center of the first step,and terminates at the circumference.CWXB
First Step Diameter:
0.5620 inches both ends
MRC:
A nominal measurement of the longest dimension of the second step,in distinction from width.CWXG
Second Step Length:
0.6722 inches both ends
MRC:
The nominal length of a straight line which passes through the center of the second step,and terminates at the circumference.CWXL
Second Step Diameter:
0.6874 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-634 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-16232 type m, class 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Protruding hubs

{lang[cimilar]} Spur Gears

« Gears, Pulleys, Sprockets and Transmission Chain {lang[catalog]}
قارن الآن»
واضح | أخفى