رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Rod End Connector
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
6.000 inches rod connection and 6.120 inches rod connection
MRC:
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.AATN
Shoulder Diameter:
Between 5.000 inches and 5.060 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
Between 8.000 inches and 8.250 inches
MRC:
A measurement taken at right angles to the length of a tongue,in distinction from thickness.AHHE
Tongue Width:
Between 8.000 inches and 8.250 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
Between 5.000 inches and 5.060 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
Between 3.020 inches and 3.060 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
Between 11.220 inches and 11.280 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
Between 19.250 inches and 19.280 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
8 rod connection
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
5.000 inches rod connection
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Zzzy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-500 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
96906-mil-std-271 standard (includes industry or association standards, individual manufactureer standards, etc.).
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un rod connection
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
96906-mil-std-792 government standard and 96906-mil-std-129 government standard and 81349-mil-p-23199 government specification and 96906-std-1684 government standard and 96906-mil-std-2132 government standard and 96906-mil-std-1308 government standard
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Material will be in accordance with ships parts control center activity hx quality control, manufacturing and testing specifications
