رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a first end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand first end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.985 inches first end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
3.625 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.499 inches
MRC:
The measurement between specified points of the slot,in distinction from height.AAZT
Slot Depth:
0.187 inches
MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Cap and locknut
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.625 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
0.187 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.484 inches
MRC:
The maximum measurement of the smallest dimension of the accommodated item,in distinction from length or width.ABWK
Item Accommodated Maximum Thickness:
0.188 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.842 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
4.000 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
4.750 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.187 inches
MRC:
A measurement from the top to the bottom of the bevel on the first end.ADGP
First End Chamfer Depth:
0.007 inches
First Packing Chamber Inside Diameter:
3.250 inches
First Packing Chamber Length:
2.000 inches
Distance From Outside Edge Of First Packing Chamber To Edge Of Mounting Flange:
1.985 inches
MRC:
The number of packing chambers contained in the item.ADJG
Packing Chamber Quantity:
1
MRC:
The means of attaching the item.AXGY
Mounting Method:
Thread
MRC:
Designates the size of the item.BGBD
Size:
2.844 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 first end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
4.000 inches first end
First End Chamfer Angle:
10.0 degrees
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
9
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyamide
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Slotted-single
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un first end
